How to Crochet Plush Mr. Snow Snail with Santa Bauble Holiday Gift Plushie

This is part 2 of my new “crochet holiday snail plushies” series! You have already learned to crochet a snail buddy with a bauble shell plush. Today, learn how to crochet this Mr. Snowman Snail in a black hat plushie with a FREE written pattern. This crochet snail buddy plushie, which you can use as a New Year, winter, and Christams ornament, has a Santa belly shell and is finished with felt detailing/

It has a carrot nose and looks SUPER adorable; cuter than the crochet green holiday snail.

Can be crocheted in under 45 minutes using the plush yarn. Now, continue reading for learning more about this oh-so cute crochet plush snail project for all skill levels!

Pattern to Crochet the Snowball Snail Buddy Plushie for Gifting 

Skill Level: Beginner – Level 4 

Materials & Tools

  • Plush / Chenille Yarn (Category 5):

    • White/Cream: For the snail body and head

    • Red: For the Christmas bauble shell 

    • Black: For the Santa belt and Top Hat

    • Thin Plush Yarn (Orange): For the carrot nose

  • Yellow Felt: Small scrap to cut out the belt buckle outline

  • Embroidery Thread / Fine Cotton Yarn: Small amount in black for embroidering the smile

  • Crochet Hook: 4.5 mm (or matching your plush yarn size)

  • Safety Eyes or Flat-back Beads: 8 mm (2 pieces)

  • Stuffing: Polyester fiberfill (holofiber)

  • Tapestry Needle, Scissors, Stitch Marker, Hot Glue Gun

Abbreviations (US Terms)

  • ch: chain

  • sc: single crochet

  • inc: increase (2 single crochet stitches in the same stitch)

  • dec: decrease (single crochet 2 stitches together)

  • sl st: slip stitch

  • st(s): stitch(es)

  • Rnd(s): round(s)

Difficult & Special Stitch Guides

1. Alternative Magic Ring (2-Chain Method for Plush Yarn)

Plush yarn often snaps or sheds its fuzz when pulling a traditional magic ring tight. Use the 2-chain start instead:

  1. Make a slip knot and chain 2.

  2. Work all specified single crochet stitches directly into the second chain from the hook (the first chain you made).

  3. Pull the starting tail gently to close the tiny central hole.

2. Invisible Decrease (dec) in Plush Yarn

  1. Insert your hook under the front loop only of the first stitch.

  2. Without yarning over, immediately insert your hook under the front loop only of the second stitch (you now have 2 front loops plus your working loop on the hook).

  3. Yarn over and pull through both front loops.

  4. Yarn over and pull through the remaining 2 loops on your hook.

3. Bobble Stitch / Antennae Horn (4-dc cluster with Color Change)

The two horns on the head are formed using a 4-double-crochet cluster worked in Color B while the rest of the head is in Color A:

  1. Changing to Color B: On the stitch right before the horn, work the single crochet until 2 loops remain on your hook. Drop Color A and draw Color B through to finish the stitch.

  2. Making the Bobble:

    • Yarn over with Color B, insert the hook into the next stitch, yarn over, and pull up a loop (3 loops on hook). Yarn over and pull through the first 2 loops (2 loops remain on hook).

    • Repeat this 3 more times in the exact same stitch until you have 5 loops on your hook.

    • Yarn over and pull through all 5 loops on your hook.

  3. Switching back to Color A: Ch 1 using Color A to lock the cluster, pulling the tails snugly so the bobble pops outward. Continue working single crochets in Color A.

Part 1: The Red Bauble (Shell Replacement)

Worked in Red plush yarn.

  • Round 1: Work 6 sc into a magic ring [6 sts].

  • Round 2: [Inc] repeat 6 times — 2 sc in each st [12 sts].

  • Round 3: [1 sc, inc] repeat 6 times [18 sts].

  • Round 4: [2 sc, inc] repeat 6 times [24 sts].

  • Round 5: [3 sc, inc] repeat 6 times [30 sts].

  • Rounds 6 – 10: Sc in all 30 st (5 rounds total of straight single crochet) [30 sts].

  • Round 11: [3 sc, dec] repeat 6 times [24 sts].

  • Round 12: [2 sc, dec] repeat 6 times [18 sts].

  • Round 13: [1 sc, dec] repeat 6 times [12 sts]. (Firmly stuff the ball with polyfill here before the opening gets too small).

  • Round 14: [Dec] repeat 6 times [6 sts].

  • Fasten off, leaving a tail. Weave through the front loops of the remaining 6 stitches, pull tight to close completely, and secure.

Part 2: The Santa Belt

Worked in Black plush yarn (Category 5).

  • Ch 31

  • Row 1: Starting from the 2nd chain from the hook, make 30 sc.

  • Fasten off, leaving a tail.

  • Belt Buckle: Cut a small rectangle outline out of the yellow felt. Secure the felt buckle onto the center of the black belt strip with glue or stitches.

Part 3: The Snail Body & Head (Snowman)

Worked in White/Cream plush yarn.

  • The Tail & Body:

    • Rnd 1: Ch 2, work 6 sc into the 2nd ch from hook [6]

    • Rnd 2: 6 sc around [6]

    • Rnd 3: (2 sc, 1 inc) repeat 2 times [8]

    • Rnds 4–7 (4 rounds): 8 sc around [8]

    • Rnd 8: (3 sc, 1 inc) repeat 2 times [10]

    • Rnds 9–13 (5 rounds): 10 sc around [10]

  • Expanding for the Head:

    • Rnd 14: 10 inc [20]

    • Rnds 15–17 (3 rounds): 20 sc around [20]

    • Rnd 18: (8 sc, 1 dec) repeat 2 times [18]

    • Stuffing Check: Lightly stuff the neck and middle section. Keep the narrow tip of the tail flat and unstuffed.

Rnd 19: (1 sc, 1 dec) repeat 6 times [12]

Horns / Antennae Round

  • Rnd 20:

    • In Color A: 4 sc, then work 1 sc changing to Color B on the final pull-through (5 sc total).

    • In Color B: 1 bobble stitch (4-dc cluster) in the next stitch. Close and lock the bobble with Color A.

    • In Color A: 4 sc, then work 1 sc changing to Color B on the final pull-through (5 sc total).

    • In Color B: 1 bobble stitch in the next stitch. Close and lock with Color A [12]

Cut the Color B yarn tails, tie them securely on the inside, and tuck them into the head.

Firmly stuff the head with fiberfill, rounding out the cheeks and top of the head evenly around the horns.

  • Rnd 21: 6 dec [6]

Fasten off, leaving a tail. Using your tapestry needle, weave through the front loops of the final 6 stitches, pull firmly closed, knot securely, and hide the yarn tail inside the head.

Part 4: The Carrot Nose

Worked in thin orange plush yarn.

  • Rnd 1: Start 3 sc in a magic ring [3]

  • Rnd 2: (sc, inc) repeat 1 time, sc [4]

  • Rnd 3: (sc, inc) repeat 2 times [6]

  • Rnd 4: (2 sc, inc) repeat 2 times [8]

  • Fasten off, leaving a short tail for sewing.

Part 5: The Top Hat

Worked in Black plush yarn.

  • Rnd 1: start 8 sc in a magic ring (8)

  • Rnd 2: inc 8 times (16)

  • Rnd 3: (sc, inc in next st) repeat 8 times (24)

  • Rnd 4: BLO sc in all 24 st (24)

  • Rnd 5: (sc in next 4 st, dec) repeat 4 times (20)

  • Rnd 6: sc in all 20 st (20)

  • Rnd 7: (sc in next 3 st, dec) repeat 4 times (16)

  • Rnd 8: sc in all 16 st (16)

  • Rnd 9: FLO (sc in next st, inc in next st) repeat 8 times (24)

  • Rnd 10: (sc in next 2 st, inc in next st) repeat 8 times (32)

  • Rnd 11: sc in next st, sl st in next st, do not crochet in remaining stitches (1)

  • Fasten off and sew the remaining yarn to round 7, then sew the hat onto the top-side of the snowman’s head.

Part 6: Facial Details & Stuffing Guide

  1. Stuffing Technique:

    • Tail: Leave the very tip of the tail completely flat and unstuffed so it curves naturally against the shell.

    • Body & Neck: Stuff moderately to support the head while maintaining flexibility.

    • Head: Stuff firmly to create a round, plush head shape.

    • Bauble: Pack fiberfill firmly inside the sphere to achieve a round shape.

  2. Facial Features:

    • Insert/glue 8 mm safety eyes between Rnds 17 and 18, spaced 4 to 5 stitches apart.

    • Stitch or glue the Carrot Nose directly centered between and slightly below the eyes.

    • Embroider a small curved smile with black embroidery thread on Round 15/16.

Part 7: Assembly

  1. Belt & Shell: Wrap the black belt with the yellow felt buckle around the red bauble shell and secure with glue or stitches.

  2. Attaching Shell: Position the red bauble into the curve on the back of the snowman body. Sew or glue securely along the contact seam.

  3. Top Hat: Attach the top hat angled slightly to one side on the head as instructed.

  4. Keychain (Optional): Attach a split keychain ring through the top stitches of the head next to the hat.

Leave a Reply

Your email address will not be published. Required fields are marked *